Cooktop Repair in Lake Elsinore, CA

Burner won't light. Failed igniter for that specific burner ($120 to $220) or blocked burner cap. Blocked caps are a homeowner check: remove, clear debris, replace.

Burner clicks continuously without lighting. Moisture or debris on the spark igniter, or failed spark module. Cleaning solves in many cases; module replacement runs $180 to $350.

Burner won't stay lit. Failed thermocouple or flame sensor. Standard replacement $120 to $200.

Flame is yellow or uneven. Clogged burner orifice or gas pressure issue. Orifice cleaning is straightforward.

Gas smell when cooktop is off. Turn off the gas supply at the shutoff valve immediately and call the gas utility (SoCalGas at 800-427-2200). Do not use electrical switches or the cooktop.

Electric coil cooktops common in older Country Club Heights and downtown kitchens use simpler technology:

Coil element won't heat. Failed heating coil ($80 to $150 per coil replacement). Widely available.

Coil element stays on high. Failed infinite switch stuck closed. Safety-relevant. Replacement standard.

Coil element cycles rapidly. Failing infinite switch contacts. Replacement straightforward.

Coil element doesn't seat properly. Corroded terminal block. Cleaning or replacement addresses.

Coil cooktop repair is inexpensive because components are simple, standardised, and readily available.

Smooth-top radiant cooktops common in newer Summerly, Canyon Hills, and Tuscany Hills builds:

Element won't heat. Failed radiant heating element ($150 to $300). Elements hidden under the glass require the cooktop to be pulled for access.

Element cycles rapidly or stays on high. Failed infinite switch ($80 to $180).

Radiant surface cracked or damaged. Radiant cooktops can crack from thermal shock or impact damage. Full glass top replacement runs $400 to $900. Continuing to use a cracked cooktop is unsafe.

Induction cooktops are increasingly common in Summerly and Canyon Hills luxury builds. Different technology than resistive electric:

Cooktop shows error code. Manufacturer-specific error codes on Bosch, Samsung, LG, Wolf, and Viking induction cooktops. Common codes indicate temperature sensor failure ($150 to $250), coil failure (individual coil replacement $400 to $800), or power supply issues.

Cooktop doesn't recognise cookware. Cookware must be ferromagnetic (magnets stick) for induction to work. Failed cookware detection circuit is the likely cause.

Cooktop makes buzzing or humming sound. Some induction cooktops produce noise proportional to power output; this is normal. Change in sound character can indicate a failing cooling fan for the internal electronics ($180 to $350).